NEC NDA-24305 LNR [#]/SPD [ ] 1 811625643 LNR [#]SPEED [ ] 1, 811625643, LNR [#]/SPD [ ] 2 25191 LNR [#]/SPEED [ ] 2, 25191

CHAPTER 5 NDA-24305
Page 10 4
Revision 1.0
LAST NUMBER CALLED-Dterm-PRI
L-42D LAST NUMBER CALLED-Dterm-PRI
1. General Description
This feature allows a Dterm user to redial the telephone numbers previously dialed from the terminal. With this
feature, the Dterm user can choose any destination out of the latest five calls, which have been stored in the
memory of the system, and place a call without having to redial the full number.
Note: The maximum digits of the destination is 32 digits.
2. Operating Procedure
1. How to check the dialed numbers stored in the memory (up to 5 destinations):
(a) Press the LINE/SPD key on a Dterm.
• The Prime Line lights Green.
• The Speaker Lamp lights Green.
• Receive Dial Tone from the speaker with the following display on the Dterm.
(a) Press the LINE/SPD key on the Dterm again.
• The Prime Line lights Green.
• The Speaker Lamp lights Green.
• Receive Dial Tone from the speaker with the following display on the Dterm.
Note: The indication on the display is changed in sequence by pressing the LINE/SPD key. Once the stored
telephone number display reaches “LNR[#]/SPD[ ]-5”, “LNR[#]/SPD[ ]-1” appears again by pressing
the LINE/SP D key.
LNR [#]/SPD [ ] – 1
811625643 LNR [#]SPEED [ ] – 1 811625643
[Dterm Series III] [Dterm Series E]
LNR [#]/SPD [ ] – 2
25191 LNR [#]/SPEED [ ] – 2 25191
[Dterm Series III] [Dterm Series E]