CHAPTER 4 NDA-24305
Page 22
Revision 1.0
COMMANDS CONCERNING ISDN DATA ASSIGNMENT
2.4 ARTI: ASSIGNMENT OF TRUNK APPLICATION DATA
RST (CDN1) Assignment of Restart
0 = Restart Send per Individual Channel
1 = –
2 = –
3 = Restart not Send
HMT (CDN2) When assigning this data, zero (0) should always be entered.
TRCRST (CDN3) Call Restriction by Information transfer rate in Bearer Capability Information Element
0 = No restriction
1 = Data call re striction (Unr estricted digital, Restricted dig ital and Video data calls are
restricted.)
2 = Speech call restriction (Speech, 3.1 KHz audio and 7KHz audio calls are restricted.)
3-15 = –
TRSRST (CDN4) Call Restriction by Information transfer rate in Bearer Capability Information Element
0 = No restriction
1 = 384 kbps (H0) call is restricted
2 = 1536 kbps ( H11)/1920 kbps (H 12) call is restricted
3 = 384 kbps and 1536 (H11)/1920 (H12) kbps calls are restricted
4-15 = –
T309LNK (CDN5)Assignment of Timer T309 for Data Link Failure
0 = Layer 2 Alarm with T309 is Disabled
1 = Layer 2 Alarm [Temporary] with T309 is Enabled
2 = Layer 2 Alarm [Permanent] with T309 is Enabled
3 = –
T309CON (CDN6)Assignment of Timer T309 for Layer 1 Failure
0 = Layer 1 Alarm with T309 is Disabled
1 = Layer 1 Alarm [Temporary] with T309 is Enabled
2 = Layer 1 Alarm [Permanent] with T309 is Enabled
3 = –
LLCRST (CDN7) Ca ll res t ri ct ion by u ser rat e in Low Layer Capability Infor m ati o n E lement
0 = No restriction
1-31 = Call which includes this user rate value is restricte d Note 1
Note 1: User rate value is based on IT U -T Q-931.
DTRT (CDN11) Detection of ALL 1 alarm signal (DTI Layer 1 alarm)
0 = –
1 = Detection of AL L 1 alarm signal as a Layer 1 alarm
TMPRT (CDN12) Temporary Route Information over CCIS
0 = –
1 = In CCIS, the route informatio n ca n be transferred by the call control mess a ge s.
Moreover, the call restriction can be check ed re fe r r i n g t o t his route information.