NDA-24305 CHAPTER 5
Page 61
Revision 1.0
CALL FORWARDING-ALL CALLS-ANNOUNCEMENT-PRI
STEP 4: ASFC - Assign the stations to activate CALL FORWARDING-ALL CALLS [C-5] a Service
Feature Class that allows SFI = 7.
STEP 5: AKYD - For Dterm sets, CALL FORWARDING-ALL CALLS [C-5] may be assigned to a
programmable line/feature key. Assign KYI = 1 and FKY = 2.
STEP 6: ATNR - Allow tenant-to-tenant connection for Inter-and Intra-tenant connections. Assign Tenant
Restriction Index (TRI) = 1. For this service feature to be set by the Attendant Console,
assign Inter- and Intra-Tenant connection via the Attendant Console TRI = 3. Also allow
TRI = 0, station-to-station calling.
ANNOUNCEMENT SERVICE
STEP 1: ANPD - Reserve a number level for Trunk Access. Assign for Connection Indexes for Normal.
Assign NND values in accordance with a predetermined numbering plan.
STEP 2: ASPA - Assign an access code to the announcement trunk. Assign SRV = ANNC and the EQP
number assignment should be as assigned with the AAED command.
STEP 3: ARTD - Assign the announcement route (in the case of DAT) as shown below.
STEP 4: ATRK - Assign the LENs, Announcement Trunk Route Number, Trunk Number, and Tenant
Number. Assign one or more trunks to a specific route used as an announcement trunk.
STEP 5: MBTK - Assign the Make Idle status to the announcement trunk.
STEP 6: ARRC - Allow trunk-to-trunk connection (Bch route (ISDN) to Announcement Trunk route) using
ARI: D, Direct Connection.
RT: 1
1-OSGS : 2 2-ONSG : 2 6-TCL : 4 7-L/T : 1
The other data must be set “0” (default data).