CHAPTER 6 NDA-24305
Page 26 2
Revision 1.0
CALL FORWARDING SUPPLEMENTARY SERVICE (SS-CF) WITH REROUTING
2. Rerouting function is also available for the call in the example below.3. When interworking through FCCS link, rerouting function is activated with no restriction.4. When station-to-station connection is establi she d between a calli ng par ty and a c alle d party, the called partyand a forwarded party, rerouti ng function is not acti v ated (St ation-to-stati on connecti on in a Fusion Networkis also applied to this condition).5. When the selected route for forwarding a ca ll (from the called station to the forwarded station) is other thanQ-SIG, IS-11572 line, Call Forwarding service is activated without rerout ing function. See the fi gure belo w .
Calling Station (Station A): Office Code = 80, Statio n no. = 1000
Called Station (Station B): Office Code = 82, Station no. = 3000
Destination Station (Station C): Office Code = 83, Station no. = 4000
C.F. is set to 83-4000
: Q-SIG/IS-11572
: ACIS/CCIS
[routing selection data to Office 83]
1st choice RT is RT1
2nd choice RT is RT2
Station B
3000
82
Station A
1000
80 81
RT2
RT1
Station C
4000
83
1) Station A originates a call to Station B through Office 81. (the call is routed to Station B th rough ACIS/CCIS
and Q-SIG/IS-11572 line).
2) Since Station B is set Call Forwarding service, the call is forwarded to Station C.
3) New line from Office 81 to 83 is established for the call (RT1 is the first choice routing from Office 81 to
83). Rerouted line connection is Office 80 Office 81 Office 83.
Note: ACIS/CCIS line (Office “80” to “81”) is not r e establis hed and Station COs number is not displayed on
the LCD of Station A belonging to Office ��80”.
In this case, rerouting function is not activated.
Station A calls to Station B, which is set C.F. service to Station C.
The call is forwarded to Station C using the protocol other than Q-SIG/IS-11572.
Station A
Q-SIG/
IS-11572 ACIS/CCIS
(2000)
81
Station B (3000)
82
Station C
(4000)
83