NEC NDA-24305 PCK XXXX, PICK UP XXXX

CHAPTER 5 NDA-24305
Page 48
Revision 1.0
CALL PICKUP-GROUP-Dterm-PRI
C-97D CALL PICKUP-GROUP-Dterm-PRI
1. General Description
This feature permits a station user to answer an ISDN network call directed to another line in a preset CALL
PICKUP-GROUP by using a programmable line/feature key.
CALL PICKUP-GROUP-Dterm-PRI may be used by seizing Dial Tone from any multi-line appearance on the
Dterm.
2. Operating Procedure
Picking up an incoming call:
1. An incoming call from the ISDN network terminates to a trunk.
2. The stations within the same call pickup group ring.
3. Lifts the handset; receives Dial Tone.
4. Press the call pickup group feature key; the call is connected to the station. The LCD displays:
Picking up an incoming call (consultation Hold):
1. An incoming call from the ISDN network terminates to a trunk.
2. The stations within the same call pickup group ring.
3. Press the “TRANSFER”/“CA L L HOL D ” featur e key; r ece ives Specia l Dial Tone.
4. Press the call pickup group feature key; the call is connected to the station.
5. The first party is put on CALL HOLD [C-6] status.
3. Programming
STEP 1 ~ STEP 3: Refer to [C-97 ] “CALL PICKUP-GROUP-PRI” in this manual.
STEP 4: AKYD - Optional. Assign a programmable Line/Feature key as a CALL PICKUP key. Assign KYI
= 1 and FKY = 12.
PCK XXXX
(Time Display)
CALLING
STATION/TRUNK
XXXX
CALLED
STATION
[Dterm Series III]
PICK UP XXXX
(Time Display)
CALLING
STATION/TRUNK
XXXX
CALLED
STATION
[Dterm Series E]