NEC NDA-24305 - page 272

CHAPTER 6 NDA-24305
Page 25 4
Revision 1.0
CNIP/CONP
C-153 CNIP/CONP
1. General Description
In between Q-SIG networks, this feature allows calling or called party's information, called Name ID, to be
displayed on the Dterm LCD. This feature conforms to ETS 300 238. This feature is available for IS-11572
networks.
• Calling Name Identification Presentation (CNIP): Calling party's information (Name ID) is displayed on
the called party's Dterm LCD.
• Connected Name Identification Presentation (CONP): Called party's information (Name ID) is displayed
on the calling party's Dterm LCD.
This feature is also available when int er working with a CCIS interface.
2. Operating Procedure
No manual operation is required.
3. Service Conditions
1. This service is not available when:
• a tandem office is not provided with this feature or Name Display - System - CCIS [N-37].
• a call is routed through a signaling interface other than Q-SIG or CCIS.
2. The routes to the offices not provided with this feature must be separated from the routes to the offices
provided with this feature.
3. While hearing Ring Back Tone, Name ID of the called party is displayed on the calling party's Dterm LCD.
Note that the display is not changed even if the call is transferred using such features as CALL
FORWARDING - ALL CALLS.
4. When a call is transferred to another of fice usi ng a forwardi ng feature suc h as CALL FOR WARDING - ALL
CALLS - OUTSIDE, Name ID of the terminated station is displayed on the calling party's Dterm LCD.
5. Even if the called party is in busy or lockout state, the called party's Name ID is displayed on the calling
party's Dterm LCD. However, when the called party is in Do Not Disturb state, Name ID is not displayed.