NEC NDA-24305 - page 67

NDA-24305 CHAPTER 5
Page 49
Revision 1.0
CALL TRANSFER-ATTENDANT-PRI
C-98 CALL TRANSFER-ATTENDANT-PRI
1. General Description
This feature permits a station use r, while connected to an ISDN ne t work call, to signal the Attendant and have
the Attendant transfer the call to another station within the system.
2. Operating Procedure
Calling the Attendant:
1. While engaged in a PRI trunk call, press the switchhook; receive Special Dial Tone.
2. Dial the operator/access code.
3. a. ATTENDANT CONSOLE [A-3] “RCL” lamp flashes and buzzer sounds.
b. The station receives Ringback Tone.
Answering by the Attendant:
1. Refer to “ATTENDANT CONSOLE USER’S GUIDE”.
If the station wishes to return to the Central Office trunk call while the Attendant is being called:
1. Press the switchhook; the “RCL” lamp goes out; the buzzer stops.
2. Ringback Tone stops; the station returns to PRI trunk call.
3. Programming
STEP 1: ASYD - S ystem Data 2, Index 1, bit 0 and 1: Assign a data to allow CONSULTATION HOLD. All
types of connections.
STEP 2: ATNR - Allow tenant restriction. Assign Tenant Restriction Index (TRI) 0, and 4 on an intra-and
Inter-tenant basis.