NEC NDA-24305 - page 157

NDA-24305 CHAPTER 5
Page 139
Revision 1.0
STATION MESSAGE DETAIL RECORDING SYSTEM-RS232C-PRI
S-83 STATION MESSAGE DETAIL RECORDING SYSTEM-RS232C-PRI
1. General Description
This feature provides a “call record” for all outgoing station-to-PRI trunk calls and incoming PRI trunk-to-
station calls. When the system is equipped with this feat ure an RS232C output port is provide d, permitting d irect
interface with a customer-o wned computer system. All output is in the ASCII forma t, and includes the
following:
• Calling Station Number
• Called Station Number (24 digits maximum)
• Route Number
• Start of Call Time
• Disconnect Time
• Year, Month and Date
• Attendant Handled
• ACCOUNT CODE [A-18]
• FORCED ACCOUNT CODE [F-7] /AUTHORIZATION CODE [A-28]
• AUTHORIZATION CODE-EPN [A-22] (8 digits maximum)
2. Operating Procedure
No manual operation is required.
3. Programming
STEP 1: ASYD - System Data 1, Index 20, bit 7: Charging to a call transferred by CALL FORWARDING-
OUTSIDE
0=Charging is made to the caller of the transferred call.
1=Charging is made to the station which has set CALL
FORWARDING-OUTSIDE service.
Index 32, bit 1: 1=Record the tenant information
bit 2: 1=Record the route taken
bit 5: Is t he Route Access code recorde d? 0/1=No/Yes.
bit 6: Is the number sent or number dialed recorded in SMDR?
0/1=Number to be sent/Number to be dialed.
bit 7: 1=SMDR is in service
Index 33: • Data 00 Hex=Split Billing
• When bit 5=1 (Total Billing for incoming calls)
and/or bit 6=1 (Total Billing for outgoing calls),
the following data can be assigned.
b4 b3
0 0 = Telephone called first
0 1 = Telephone called last
1 0 = Next Telephone receiving call from ATT/Station.
1 1 = Last Telephone receiving call form ATT/Station.
Index 34, bit 0: 1=Enables RS-232C transmission.
bit 5: Is the converted number sent? 0/1=No/Yes.