NEC NDA-24305 - page 76

CHAPTER 5 NDA-24305
Page 58
Revision 1.0
CALL PARK-PRI
C-119 CALL PARK-PRI
1. General Description
This feature enables the Attendant(s) or station users to “Park” calls from the ISDN network against t h eir o wn
station numbers. Calls can easily be retrieved from any station within the system.
2. Operating Procedure
When an ISDN trunk party and ATTENDANT CONSOLE [A-3] are talking:
1. The Attendant presses the “CALL PARK” key; the CALL PARK number is automatically selected and
displayed at the ATTENDANT CONSOLE [A-3].
2. The Attendant receives Service Set Tone.
3. The Attendant presses either the “RELEASE” or “CANCEL” key .
Note: If no CALL PARK numbers are available, Attendant receives Busy Tone and no number is displayed.
When an ISDN trunk party and a station user are talking:
1. The station user momentarily presses the switchhook; receives Special Dial Tone.
2. Dial the CALL PARK access code, the ISDN trunk connects to the called station is placed into call park
state; receives Service Set Tone.
3. Replace the handset.
To retrieve a Parked Call from the Setting Station:
1. Dial the CALL PARK local retrieval code; the parked call is reconnected.
To retrieve a Parked Call from a Different Station:
1. Dial the CALL PARK remote retrieval code and the number of the station which has parked the call; the
parked call is reconnected.
To retrieve a Parked Call set by ATTENDANT CONSOLE [A-3] from the station user.
1. Dial the CALL PARK remote retrieval code and call park number; the parked cal l i s reconnected.