Firewall Protection
139
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IPv6 LAN WAN Outbound Rules

To create a new IPv6 LAN WAN outbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 62 on page 136).
2. Click the Add table button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv6 displays:
Figure 64.
3. Enter the settings as explained in Table 32 on page 128. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•LAN Users
•WAN Users
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make a selecti on from the following drop-down lists:
•Select Schedule
•QoS Priority
4. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.
Create LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is