NETGEAR JNR1010 Technical Specifications

Supplemental Information

95

N150 4-Port Wireless Router JNR1010

Technical Specifications

Wireless Wireless communication Enabled

SSID name See router label

Security WPA2-PSK (AES)

Broadcast SSID Enabled

Transmission speed Auto*

Country/region United States in the US; otherwise varies by region

RF channel 6 until region selected

Operating mode Up to 150 Mbps

Firewall Inbound (communications coming

in from the Internet)

Disabled (bars all unsolicited requests)

Outbound (communications going

out to the Internet)

Enabled (all)

*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.

Network conditions and environmental factors, including volume of network traffic, building materials and

construction, and network overhead, lower actual data throughput rate.

Table 4. JNR1010 Router specifications

Feature Description

Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Dynamic DNS, and UPnP.

Power adapter AC plug is

localized • 110V-240V, 50/60 Hz, input

• All regions (output): 5V DC @ 1A, output

Dimensions 197 x 137 x 30 mm (7.8 x 5.4 x 1.2 in)

Weight 0.240 kg (0.53 lb)

Operating temperature -5° to 45° C (23º to 113º F)

Operating humidity 95% maximum relative humidity, noncondensing

Electromagnetic Emissions China CCC & SRRC, CE

LAN 10BASE-T or 100BASE-Tx, RJ-45

WAN 10BASE-T or 100BASE-Tx, RJ-45

Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the

footnote for the previous table.

Radio data rates Auto Rate Sensing

Table 3. Factory default settings (Continued)

Feature Default behavior

Contents

Main Page Contents Chapter 1 Hardware Setup Chapter 2 Getting Started with NETGEAR genie Chapter 3 genie Basic Settings Chapter 4 genie Advanced Home Chapter 5 Security Chapter 6 Administration Chapter 7 Advanced Settings Chapter 8 Troubleshooting Appendix A Supplemental Information Appendix B Notification of Compliance Index Getting to know your router Unpack Your Router Position Your Router Hardware Features Front Panel Table 1. Front panel LED descriptions Hardware Setup N150 4-Port Wireless Router JNR1010 Side Panel The router left side panel has the Wireless button and the WPS/FastLane button. Page Connecting to the router Router Setup Preparation Use Standard TCP/IP Properties for DHCP Gather ISP Information Wireless Devices and Security Settings Types of Logins NETGEAR genie Setup Use NETGEAR genie After Installation Upgrade Router Firmware Router Dashboard (Basic Home Screen) Join Your Wireless Network WPS Method Manual Method NETGEAR genie App and Mobile genie App Page Your Internet connection and network Internet Setup Internet Setup Screen Fields Attached Devices Parental Controls Page Basic Wireless Settings Wireless Settings Screen Fields Page Guest Networks Guest Network Wireless Security Options WPA Encryption FastLane Page Specifying custom settings Setup Wizard WPS Wizard Setup Menu WAN Setup Default DMZ Server Change the MTU Size LAN Setup LAN Setup Screen Settings Use the Router as a DHCP Server Address Reservation Quality of Service (QoS) Setup Enable WMM QoS for Wireless Multimedia Applications Set Up QoS for Internet Access Set Up QoS for Applications and Online Gaming Set up QoS for a Router LAN Port Set up QoS for a MAC Address Edit or Delete an Existing QoS Policy Keeping unwanted content out of your network Keyword Blocking of HTTP Traffic Block Services (Port Filtering) Page Schedule Blocking Security Event Email Notifications Managing your network Upgrade the Router Firmware View Router Status Router Status Internet Port Page Wireless AP View Logs of Web Access or Attempted Web Access Manage the Configuration File Back Up Settings Restore Configuration Settings Erase Set Password Page Advanced Wireless Settings Restrict Wireless Access by MAC Address Wireless Repeating Function (WDS) Page Wireless Repeating Function Set Up the Base Station Set Up a Repeater Unit Port Forwarding and Triggering Remote Computer Access Basics Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Add a Custom Service Edit or Delete a Port Forwarding Entry Application Example: Making a Local Web Server Public Set Up Port Triggering Page Dynamic DNS Page Static Routes Remote Management Universal Plug and Play Page Traffic Meter Page Quick Tips Sequence to Restart Your Network Check Ethernet Cable Connections Wireless Settings Network Settings Troubleshooting with the LEDs Power LED Is Off or Blinking Internet or Ethernet Port LEDs Are Off Wireless LED Is Off Cannot Log In to the Router Cannot Access the Internet Your Router Cannot Obtain an IP Address from the ISP Your Router Can Obtain an IP Address from the ISP But Cannot Access the Internet Troubleshooting PPPoE Troubleshooting Internet Browsing Changes Not Saved Wireless Connectivity Wireless Signal Strength Restore the Factory Settings and Password Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device A Factory Settings Technical Specifications Supplemental Information Table 4. JNR1010 Router specifications Table 3. Factory default settings (Continued) Table 4. JNR1010 Router specifications (Continued) B B. Notification of Compliance NETGEAR Wireless Routers, Gateways, APs Regulatory Compliance Information Europe EU Declaration of Conformity EDOC in Languages of the European Community Notification of Compliance N150 4-Port Wireless Router JNR1010 Notification of Compliance Interference Reduction Table Index A B C D G H I K L Q R S T U