N150 4-Port Wireless Router JNR1010

WPS Settings.You can add WPS devices to your network:

Disable Router’s PIN. The router’s PIN lets you use the WPS PIN method to join the wireless network. Selecting this check box disables the PIN, which means the WPS PIN method cannot be used.

Keep Existing Wireless Settings. By default this check box is selected so that when WPS is used to join the wireless network, the router wireless settings do not change.

Wireless Card Access List. Click the Set Up Access List button display the Wireless Card Access List screen. You can restrict access to your network to specific devices based on their MAC address.

3.Click the Apply button.

Restrict Wireless Access by MAC Address

You can create a list of computers and wireless devices that are allowed to join the wireless network. This list is based on the unique MAC address of each computer and device.

Each network device has a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0¡V9, a¡Vf, or A¡VF only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless card or network interface device. If you do not have access to the label, you can display the MAC address using the network configuration utilities of the computer. You might also find the MAC addresses in the Attached Devices screen.

To restrict access based on MAC addresses:

1.Select Advanced > Advanced Setup > Wireless Settings and click Setup Access List.

The Wireless Card Access List screen displays.

2.Click Add to add a wireless device to the wireless access control list.

The Wireless Card Access Setup screen opens and displays a list of currently active wireless cards and their Ethernet MAC addresses.

Advanced Settings

63

Page 63
Image 63
NETGEAR JNR1010 manual Restrict Wireless Access by MAC Address