N150 4-Port Wireless Router JNR1010
3.In the Allow Remote Access By section, specify the external IP addresses to be allowed to access the router’s remote management, as follows:
•To allow access from a single IP address on the Internet, select Only This Computer. Enter the IP address that will be allowed access.
•To allow access from a range of IP addresses on the Internet, select IP Address Range. Enter a beginning and ending IP address to define the allowed range.
•To allow access from any IP address on the Internet, select Everyone.
Note: For enhanced security, restrict access to as few external IP addresses as practical.
4.Specify the port number for accessing the management interface.
Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote web management interface. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.
5.Click Apply to have your changes take effect.
6.When accessing your router from the Internet, type your router’s WAN IP address into your browser’s address or location field followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number 8080, enter http://134.177.0.123:8080 in your browser.
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network.
If you use applications such as multiplayer gaming,
Advanced Settings
81
