Administration
55
N150 4-Port Wireless Router JNR1010
Internet PortThe Internet port section provides the following information:
• MAC Address. The Media Access Control address, which is the unique physical address
used by the Internet (WAN) port of the router.
• IP Address. The IP address used by the Internet (WAN) port of the router. If no address
is shown or the address is 0.0.0, the router cannot connect to the Internet.
• Connection. This shows if the router is using a fixed IP address on the WAN. If the value
is DHCP Client, the router obtains an IP address dynamically from the ISP.
• IP Subnet Mask. The IP subnet mask used by the Internet (WAN) port of the router.
• Domain Name Server. The Domain Name Server addresses used by the router. A
Domain Name Server translates human-language URLs such as www.netgear.com into
IP addresses.
• Show Statistics button. Click the Show Statistics button to display the following
screen:
The Show Statistics screen provides the following information:
• System Up Time. The time elapsed since the router was last restarted.
• Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,
the screen displays the following information:
• Status. The link status of the port.
• TxPkts. The number of packets transmitted on this port since reset or manual
clear.
• RxPkts. The number of packets received on this port since reset or manual clear.
• Collisions. The number of collisions on this port since reset or manual clear.
• Tx B/s. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
• Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN
ports.
• Up Time. The time elapsed since this port acquired the link.
• Poll Interval. The interval at which the statistics are updated in this screen. To
change the polling frequency, enter a time in seconds in the Poll Interval field, and
click Set Interval. To stop the polling entirely, click Stop.