N150 4-Port Wireless Router JNR1010
To view or change basic wireless settings:
1. On the Basic Home screen, select Wireless to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2.Make any changes that are needed and click Apply to save your settings.
3.Set up and test your wireless devices and computers to make sure that they can connect wirelessly.
If they do not, check the following:
•Is your wireless device or computer connected to your network or another wireless network in your area? Some wireless devices automatically connect to the first open network (without wireless security) that they discover.
•Does your wireless device or computer show up on the Attached Devices screen? If it does, then it is connected to the network.
•If you are not sure what the network name (SSID) or password is, look on the label on the bottom of your router.
Wireless Settings Screen Fields
You can configure the following wireless settings:
•Region. The location where the router is used. Select from the countries in the list. In the United States, the region is fixed to United States and is not changeable.
•Enable Wireless Isolation. If this check box is selected, then computers or wireless devices that join the network can use the Internet, but cannot access each other or access Ethernet devices on the network.
•Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless stations can see this wireless name (SSID) in their scanned network lists. This check box is selected by default. To turn off the SSID broadcast, clear the Allow Broadcast of Name (SSID) check box and click Apply.
genie Basic Settings
26
