NETGEAR NETGEAR 341U manual Launching Your Network Connection, Connecting the Device

Your Network Connection

Find out how to launch and end your network connection.

Launching Your Network Connection

After the device is plugged in and boots up, a connection to the best available network is launched automatically.

The device will remain connected at all times, unless:

nYou are out of signal range or the signal is blocked (in a tunnel, etc.).

nYou are in a roaming area and you have chosen not to allow roaming.

Note: Even though the device is connected, you are only billed when data is sent or received. For more information, see If the Connection is “Always On,” Am I Always Being Billed?

See also:

nInternet Connection Information

nMobile Broadband Information and Settings

nSignal Information

Connecting the Device

Connect the device to an available USB port on your computer.

Note: The NETGEAR 341U USB Modem includes TRU-Install, which is a feature that installs the necessary drivers the first time you connect your device to your Windows or Mac computer. An installation CD is not required. See TRU-Installfor more information.

To connect the device to your computer:

nInsert the device’s USB connector into a USB 2.0 or USB 3.0 slot in your computer.

Your Network Connection 10