ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
RF Exposure Warning for North America, and Australia
Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below) must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not be collocated with other antenna or radio transmitter.
Antenna Statement for North America and Australia
In addition to its own 2 antennas, the WAG102 device has been approved for use with the following detachable antennas and antenna cables:
Approved | Antenna Gain and | Approved Antenna | Antenna Cable | Maximum |
Antennas | type | Cable | Length | Transmitted Power |
NETGEAR | 18 dBi, directional | NETGEAR | 1.5 m to 30 m | 19 dBm + 18 dBi ant. |
ANT24D18 | outdoor/indoor | 01 thru 05 |
|
|
|
|
|
|
|
NETGEAR | 9 dBi, omnidirectional | NETGEAR | 1.5 m to 30 m | 19 dBm + 9 dBi ant. |
ANT2409 | outdoor/indoor | 01 thru 05 |
|
|
|
|
|
|
|
NETGEAR | 5 dBi, ceiling/wall | NETGEAR | 1.5 m to 30 m | 19 dBm + 5 dBi ant. |
ANT24O5 | indoor | 01 thru 05 |
|
|
|
|
|
|
|
*WG302 maximum radiated power in North America and Australia: 20 dBm – cable loss + antenna gain
Please go to www.netgear.com/go/wag102_fcc for an updated list of wireless accessories approved to be used with the WAG102 in North America and Australia.
Industry Canada Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations ICES 003.
Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur
The device is certified to the requirements of
iv
v2.0, September 2006
