NETGEAR WAG102NA manual Compatible and Related Netgear Products, System Requirements

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

Compatible and Related NETGEAR Products

For a list of compatible products from other manufacturers, see the Wireless Ethernet Compatibility Alliance Web site (WECA, see http://www.wi-fi.net).

The following NETGEAR products work with the WAG102 Wireless Access Point:

•WAG511 ProSafe 108 Mbps Dual Band PC Card

•WAG311 ProSafe 108 Mbps Dual Band PCI Card

•WG311T 802.11g 108 Mbps Wireless PCI Card

•WG511T 802.11g 108 Mbps Wireless CardBus Adapter

•WG511 802.11g 54 Mbps Wireless CardBus Adapter

•WG111 801.11g 54 Mbps Wireless USB Adapter

System Requirements

Before installing the WAG102, make sure your system meets these requirements:

•A 10/100 Mbps Local Area Network device such as a hub or switch

•The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the package, or one like it

•A 100-240 V, 50-60 HZ AC power source

•A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above

•At least one computer with the TCP/IP protocol installed

•802.11b or 802.11g-compliant devices, such as the NETGEAR WG511 Wireless Adapter

Introduction 1-5

v2.0, September 2006