ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
Using the Reset Button to Restore Factory Default Settings
The Reset button (see “Rear Panel” on page
•Reboot. When pressed and released quickly, the WAG102 will reboot (restart).
•Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL settings to the factory default values.
To clear all data and restore the factory default values:
1.Power off the WAG102 and power it back on.
2.Use something with a small point, such as a pen, to press the Reset button in and hold it in for at least 5 seconds.
3.Release the Reset button.
The factory default configuration has now been restored, and the WAG102 is ready for use.
Troubleshooting |
