ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

Public Community Name: The community string to allow the SNMP manager to read the wireless access point's MIB objects. The default is Public.

Private Community Name: The community string to allow the SNMP manager to read and write the wireless access point's MIB objects. The default is Private.

Manager IP address: Enter the IP address of the SNMP manager. If this is set to 255.255.255.255, any SNMP manager will be allowed.

IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from the wireless access point. The default is 0.0.0.0.

Using Syslog and Activity Log Information

The Activity Log screen displays the Access Point system activity. It also allows you to enable the SysLog option if you have a SysLog server on your LAN.

To view the Activity Log and enable a SysLog server:

1.From the main menu of the browser interface, under the Information heading, click the Available Wireless Station List link to view the list, shown below.

Figure 3-2

3-2

Management

v2.0, September 2006

Page 66
Image 66
NETGEAR WAG102NA manual Using Syslog and Activity Log Information