NETGEAR WAG102NA manual Configuring WPA2-PSK

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

To configure WPA-PSK:

1.From the Network Authentication drop-down menu, select WPA-PSK. By default, Data Encryption will be set to TKIP.

2.Enter the preshared key passphrase (Network Key).

3.Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.

4.Click Apply to save your settings.

Configuring WPA2-PSK

Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.

Figure 2-20

To configure WPA2-PSK:

1.From the Network Authentication drop-down menu, select WPA2-PSKfrom the list. By default, Data Encryption will be set to AES.

2.Enter the preshared key passphrase (Network Key).

Basic Installation and Configuration 2-35

v2.0, September 2006