3Flash shooting with the Diffuser SW-12 and Flexible Arm Clip SW-C1

Attachment of the Flexible Arm Clip SW-C1 to the SX-1

SX-1

SW-12

1 Align one of the Flexible Arm Clips with the Attachment Ring SX-1’s Mounting groove.

2 As shown in the diagram, insert the clip while aligning the SW-C1’s Mounting groove with the front of the Attachment Ring SX-1’s Mounting groove.

3 Holding one arm of the clip, open the other so that the stopper closes and slides into the SX-1, then release.

•Ensure that the SW-C1’s groove engages with the SX-1’s groove.

4 Grip the Diffuser SW-12 with the Flexible Arm Clip SW-C1.

•As shown in the diagrams below, you can use the SW-C1 in two (long or short) ways depending on which direction the clip is mounted.

Notes on using the SW-C1

• The maximum weight the SW-C1 can hold is approx. 70g (2.5 oz.).

106