3Procedures for close-up flash operation

Procedures for dual-light close-up flash operation

1 Press the [ON/OFF] buttons to turn on the camera, SU-800 and SB-R200.

• Ensure that the red ready-lights on the SU-800 and SB-R200 are on.

• Confirm that Wireless flash, close-up mode and CLS- compatible camera indicators are correctly displayed on the SU-800

2 Selecting dual-light flash operation.

Press and hold the [SEL](FUNC.) button for approx. 2 seconds to toggle between “dual-light” and “triple-light” close-up flash operations.

• “Dual-light” is preset when shipped from the factory.

Display in dual-light closeup flash operation

MODE

A

NO

SE

 

READY

MODE

A B

ON/OFF

NO AF-ILL

 

 

 

READY

 

 

 

LOCK

3 Setting the flash mode on the SU-800.

Press the [MODE] button to set the flash mode to TTL or M (manual).

•“TTL” is preset when shipped from the factory.

•The same flash mode is set for both Groups A and B.

4 Setting the SB-R200 to fire or cancel.

Press the [AB] select button to set flash firing/ canceled for group A or B.

•The flash-canceled group name disappears.

•In dual-light close-up flash operation, you cannot cancel flash firing for Groups A and B.

•Once set to flash canceled mode, flash output-level ratio in TTL mode becomes invalid, while the flash output level compensation values are retained.

•Even if the flash mode is set to flash canceled, flash output level compensation values in the M (manual) mode are retained.

70