Ready-light warning inside the camera’s viewfinder

Problem

Solution

The ready-light inside camera’s viewfinder

Set the flash mode to M (manual).

blinks when the SU-800 is mounted on

 

cameras not compatible with CLS and the

 

flash mode is set to TTL in close-up flash

 

operation (using cords).

 

 

 

A note on microcomputer-controlled Speedlights

The Speedlight incorporates a microcomputer to control flash operations. In rare cases, the Speedlight may not work properly even after a fresh battery is properly installed. If this happens, replace the battery while the Speedlight’s power is turned on.

Warning

•Batteries should not be exposed to excessive heat such as strong sunshine, fire, etc.

•Dry batteries should never be recharged in a battery charger.

•Do not expose the Speedlight to water as this may result in electric shock or cause the unit to catch on fire.

information Reference

129