Procedures for Commander flash operation

1 Setting Commander function on the SU-800.

The Commander function enables the SU-800 to act as a Commander unit to trigger remote flash unit(s) without firing itself.

1 Install the battery in the SU-800 in the same way as No. 1 in “Procedures for close-up flash operation.” (p. 28)

Battery chamber

2 Set the Commander/Close-up select switch on the SU-800 to Commander function.

Use the Commander/Close-up select switch to change the close-up function to Commander function or vice versa.

Display in Commander flash

operation

3 Attach the SU-800 to the camera in the same way as No. 2 in “Procedures for close-up flash operation.” (p. 29)

38