20

MODE

A B

 

14

19

NO AF-ILL

SEL

 

15

18

 

 

 

READY

 

 

17

 

 

LOCK

16

 

 

 

 

 

 

 

Preparation

Control buttons on the SU-800

14[ON/OFF] Button

Press to turn the power on or off.

To avoid accidental firing or a malfunction when carrying the SU-800 in your camera bag, turn off the flash unit.

15[SEL](FUNC.) button

•Press to select the items to be set. The selected item will blink and can be changed using the [] and [] buttons.

•Press for approx. 2 sec. to display another setting.

16Target Light Button

•Press to turn the Target light (focus-assist illuminator). (p. 89)

•Press for approx. 1 sec. to activate or cancel the target light. (p. 90)

17Test Button

Press to test fire the flash. (p. 88)

18[] (left) Button

[] (right) Button

Press to change the values of the items or settings that are blinking.

19[MODE] Button

Press to set the flash mode.

20[AB] Select Button

In the close-up mode, press to set the flash units in groups A and B to fire or to cancel.

 

 

 

Simultaneously press the [ON/OFF] and [MODE] buttons

MODE

A B

ON/OFF

(two-button reset) to reset all settings (selected by the

NO AF-ILL

SEL

 

Commander/Close-up select switch) to their default

 

 

 

READY

 

values. The LCD panel will blink 3 times.

 

 

LOCK

 

 

 

Using the SU-800 in low light

Press any button on the SU-800 to turn the illuminator on (when the SU-800’s power is on), and it will remain lit for about 16 seconds.

•The SU-800’s control button illuminator comes on when the camera’s LCD panel illuminator is turned on.

•The control button illuminator goes out when the shutter is released.

19