1Overview of close-up flash operation (using cords)
When used with cameras not compatible with CLS, close-up flash operation is possible using the TTL Cord SC-30 (optional) to connect the SU-800 and SB-R200.
• Close-up flash operation (using cords) is not possible with CLS-compatible cameras.
Notes on performing close-up flash operation (using cords)
•As shown in the illustration, the SB-R200 connected to the right cord is assigned as Group A, and the SB-R200 connected to the left cord is assigned as Group B.
• When the SU-800 and SB-R200 are connected using cords, operations of [ON/Off] and Target light buttons on the SB-R200 become ineffective. The settings of the [GROUP] and [CHANNEL] select dials become invalid.
• The SB-R200 turns on when the SU-800 is | | |
turned on. The SB-R200 turns off when the | Group B | Group A |
SU-800 is turned off. |
Methods for setting up
1 Setting up the SU-800 and SB-R200.
Set up the SU-800 and SB-R200 in the same way as described in “Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1” (p. 28).
• The same set-up is applicable when using the Speedlight Stand AS-20.
2 Connect the flash units using cords.
Use the optional TTL Cord SC-30 to connect between the TTL cord terminals of the SU-800 and SB-R200.
