Procedures for Commander flash operation

6 Compose a picture and shoot with flash.

SEL

READY

LOCK

O

1 Compose the picture and shoot.

Ensure that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter.

• For details on test firing, refer to page 88.

If the red ready-light blinks immediately after shooting

W

 

SPEIRELE

 

EDLIGSS R

HT

S

ON/OFF

In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red ready- light on the SB-R200 will blink for approx. 3 sec. (The ready- lights on the SU-800 and in the camera’s viewfinder do not blink.)

To compensate, move closer to the subject, set a higher ISO sensitivity or use a wider aperture and reshoot.

44