3Notes on continuous flash operation (in
Do not exceed the maximum number of continuous firings
WARNING You should allow the Speedlight to cool off for at least 10 minutes after the maximum number of continuous
firings are performed as shown in the table below:
Max. number of continuous firings
Flash mode | Max. number of continuous | |
| firings (at 6 frames/sec.) | |
TTL auto flash | 15 | |
| ||
Manual flash (Flash output level: M1/1, M1/2) | ||
| ||
|
| |
Manual flash (Flash output level: M1/4 to M1/64) | 30 | |
|
|
Synchronization during continuous flash operation
It is possible to take up to the number of frames during continuous operation as shown in the table below.
Flash output level
1/8 | 1/16 | 1/32 | 1/64 |
Up to 4 | Up to 8 | Up to 16 | Up to 30 |
|
|
|
|
122