Flash operation using the R1

6 Compose a picture and shoot with flash.

WI

 

SPE RE

 

E LE

 

DLIS

G

S

 

HTR

 

S

ON/OFF

1 Compose the picture and shoot.

Ensure that the red ready-light on the SB-R200 is on, then release the shutter.

• For details on test firing, refer to page 88.

If the red ready-light blinks immediately after shooting

W

 

SPEIRE

 

LES

 

EDLIG S R

HT

S

ON/OFF

In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red ready- light on the SB-R200 will blink for approx. 3 sec. (The ready- light in the camera’s viewfinder does not blink.)

To compensate, set a higher ISO sensitivity or use a wider aperture and reshoot.

52