6Repeating (RPT) flash operation

Setting a channel number on the SU-800

Press the [SEL](FUNC.) button on the SU-800 to display the channel number (blinking). Press the [] or [] button to change the channel number. Press the [SEL](FUNC.) button once again and the channel number will stop blinking. The last channel number to blink is the one that has been set automatically.

•Select one of the four available channels. The same channel number is set for all Groups A, B and C.

Setting a group and a channel number on the Speedlight

Display when using the SB-800

Set the same channel number as set on the SU-800.

• Refer to your Speedlight instruction manual for specific information on settings.

Setting the flash mode on each group

Firing

Firing canceled

Press the [SEL](FUNC.) button to display the group (blinking). Press the [MODE] button to set the group to fire or to cancel.

94