2Procedures for close-up flash operation (using cords)

Checking the illumination before actually taking pictures (Modeling Illumination) in close-up flash operation (using cords)

SEL

READY

LOCK

Press the Target Light button on the SU-800 and release within one second and the SB-R200’s flash fires repeatedly at a reduced flash output level. This is useful for checking the illumination and the shadows cast on the subject before actually taking the picture.

Using the Target Light (Focus-assist Illuminator) in close-up flash operation (using cords)

SEL

READY

LOCK

Press the Target Light button on the SU-800 for more than one second, the Target Light on the SB-R200 lights up.

•The Target Light illuminates for 60 seconds and goes out automatically. To cancel the illumination within 60 seconds, press the Target Light button again for more than one second.

•The Target Light also goes out when:

Releasing the shutter

Test firing

Firing the Modeling Illuminator

Pressing the [ON/OFF] button

• Pressing the Target light button on the SB-R200 is invalid.

114