4Flash shooting with Speedlight Stand AS-20Use the provided Speedlight Stand AS-20 to freely position the SB-R200. The Attachment Ring SX-1 can be attached to a tripod.
Dual-light flash operation
When shooting clear glasses (H-4) with a single built-in flash unit, distinct shadows appear behind the subject, meaning the texture of the glass cannot be reproduced successfully. In this setup (H-1), the SB-R200 is placed on the right behind the subject using the AS-20 to bounce light off the rear wall. In addition, another SB-R200 is used from the top. The result is a successful rendering of the textures and contours of the glasses.
Group B
SB-R200
AS-20
•Camera: D70
•Lens: AF-S DX Zoom-Nikkor
18-70mm f/3.5-4.5G IF-ED
•Group A: SB-R200 (TTL)
•Group B: SB-R200 (TTL)
H-4 example in “Close-up Speedlight Photography Examples” was taken using a single built-in flash.
Attachment of the SB-R200 to the AS-20
1 | Slide the SB-R200’s mounting foot into the AS-20’s |
| Speedlight mounting shoe and slide the Lock |
switch.
• Slide the Lock switch until it stops and make sure the red part can no longer be seen.
• To remove, slide the Lock switch and remove.
accessories various
2 Adjust the SB-R200’s flash head.
• The flash head of the SB-R200 tilts down to 60° and up to 45°. The flash head can be set at click stops every 15°.