2 Setting up the SB-R200.

1 Install the battery in the SB-R200 in the same way as No. 3 in “Procedures for close-up flash operation.” (p. 30)

OCK L

A S - 2 0

2 Slide the SB-R200’s Mounting Foot into the AS-20’s Speedlight Mounting Shoe and slide the lock switch.

The Mounting Foot cannot be inserted in reverse.

Slide the lock switch until it stops and make sure that the red part can no longer be seen.

operation Flash

3 Set up the SB-R200.

using

 

3m (9.8ft.)

 

Group C

 

Commander

Group B

unit

 

30˚

4m

30˚

(13.1ft.)

 

Group A

3m (9.8ft.)

With the SU-800

As a basic guide, the effective shooting distance between the Master/ Commander unit and the SB-R200 is approx. 4m (13.1 ft.) or less in the front position, and approx. 3m (9.8 ft.) at both sides. These ranges vary slightly depending on conditions and/or ambient light.

R1C1 the

Be sure to place all SB-R200 units that are set in the same group close together.

The set up range of the SB-R200 units vary depending on the Commander unit (camera, Speedlight, etc.) For details, see your Speedlight or camera’s instruction manual.

For notes on setting up the SB-R200, see “Setting up the SB-R200” on page 108.

39