2Using the SB-R200

1 Slide open the battery chamber lid in the direction of the arrow.

FF

/ON

O

 

 

FF

/ON

O

 

 

W

 

SPEIRE

E

LE

DLI

 

GSS

 

HT

ON/OFF

2 Install the battery, then close the battery chamber lid by sliding it into place.

Use CR123A (3V) lithium batteries.

Replacing the battery

When the SB-R200’s battery power is weak, the green ready-light blinks after the power has been turned on or after the flash has fired

• Replace the battery.

Functions

K

C

O

L

A S - 2 0

3 Slide the SB-R200’s Mounting Foot into the Speedlight Stand AS-20’s Speedlight Mounting Shoe and slide the lock switch.

The Mounting Foot cannot be inserted in reverse.

•Slide the lock switch until it stops and make sure that the red part can no longer be seen.

R200-SB the of use and

Attaching the SB-R200 to the front of the lens

•The SB-R200 can be attached to the front of the lens using the Attachment Ring SX-1 (p. 31).

61