3Using the Target Light (Focus-assist Illuminator)

By using the Target Light on the SB-R200, you can confirm the direction of flash light emitted.

Illuminating and canceling the Target Light using the Target Light button on the SU-800

SEL

READY

LOCK

SPEED

WIRELES

Press and hold the Target Light button on the SU-800 for more than 1 second, all Target Lights on the SB-R200 units light up.

•The Target Light illuminates for 60 seconds and goes out automatically. To cancel the illumination within 60 seconds, press the Target Light button again for more than one second.

•Pressing the button twice may be necessary depending on the conditions of the SB-R200.

•The Target Light also goes out when:

Releasing the shutter Test firing

Firing the Modeling Illuminator

Pressing the [ON/OFF] button on the SB-R200 Pressing the Target Light button on the SB-R200 Turning on the camera’s FV Lock

Illuminating and canceling the Target Light using the Target Light button on the SB-R200

 

 

SPE

 

 

E IRW

 

DL E

 

GI

L

 

H

E

 

T SS

 

SB R

 

R2-MOE

 

0

T

 

0

E

 

When the Target Light button on the SB-R200 is pressed while the SB-R200’s Target Light is off, the Target Light comes on.

•If the Target Light is on, the Target light goes out.

•The Target Light illuminates for 60 seconds and goes out automatically. To cancel the illumination within 60 seconds, press the Target Light button again.

90