To set output level compensation using the
built-in Speedlight on a D200:
1. Turn on the camera and press
the Menu button to the left of
the LCD.
2. Enter the CSM using the multi-
selector to scroll down to the
pencil icon.
3. Use the multi-selector button to
highlight CSM e – Bracketing/
Flash. Push the multi-selector
right.
4. Use the multi-selector to scroll
down to setting e3 – Built-in
Flash. Push the multi-selector right.
5. Use the multi-selector to high-
light Commander mode. Push
the multi-selector right.
6. Use the multi-selector to high-
light the built-in flash mode.
Use the multi-selector up and
down to select the preferred
flash mode.
7. Press the multi-selector right to
highlight the compensation lev-
els. Press the multi selector up
and down to adjust the exposure
compensation.
8. Repeat steps six and seven to
adjust Groups A and B.
If the group is set to “ --- “ the
flash is not set to fire, therefore,
you cannot select the exposure
compensation level to adjust it.
Note
86 Part II ✦Creating Great Photos with the Creative Lighting System
10_045275 ch04.qxp 11/28/06 8:27 PM Page 86