Getting Up andRunning Quickly
If you want to get up and running quickly
with your Nikon Speedlight SB-800 or SB-
600, all you really need to do is insert the
batteries, attach the Speedlight to your cam-
era, and then turn both the Speedlight and
the camera on. You’ll be amazed at the
quality of flash photos you can take with the
Speedlight as soon as you take it out of the
box.
The flash accepts Alkaline,
Lithium, or rechargeable AA-
sized batteries
To attach the Speedlight:
1. Turn off the camera and
Speedlight. Both the Speedlight
and camera should be turned off
before attaching. Turning off the
equipment reduces any risk of
short-circuits when attaching differ-
ent electronic devices.
2. Unlock the mounting foot lock
lever. Move the mounting foot
lock lever of the SB-800 to the
left— its unlocked position.
3. Attach the Speedlight to your
camera. Slide the Speedlight hot
shoe into the camera’s hot shoe.
Turn the mounting foot lock lever
to the right to lock the Speedlight
in place.
4. Position the flash head to the
horizontal position. When you
first attach the Speedlight to your
camera, make sure the flash head is
positioned in its normal horizontal
position. You can reposition the
flash head by pressing the flash
head tilting/rotating lock release,
and then positioning the flash head.
When using the SB-800, if the
flash head is not in the normal,
horizontal position, the LCD
panel shows a warning.
5. Turn on your camera.
6. Turn on your Speedlight. The
On/Off switch for the Speedlight is
located on the back panel, shown
in figure QT.4.
After you power up your Speedlight and
camera with the flash head in the horizontal
position, both the flash and camera sync.
You can then reposition the flash head to
your desired position.
Note
Note
2Quick Tour
Mounting foot lock lever
(unlock position)
QT.1 Turn the mounting foot lock lever to
the left to unlock.
04_045275 qt.qxp 11/28/06 8:25 PM Page 2