Connecting the Smart Device to the Camera

Fi-Wi the Using

Press the dbutton Mz(setup) menu icon (A7) MWi-Fi optionsMWi-Fi network

1 Press the multi selector to select the Wi-Fi network and press the kbutton.

Channel

Subnet mask

only) S9500 (COOLPIX Feature LAN) (Wireless

2 Select On and press the kbutton.

•SSID and the password are displayed.

•When Auth./encryp. is set to Open (default setting), the password is not displayed.

•If no connection confirmation is received from the smart device within 3 minutes, the setting returns to Off.

Wi-Fi network

On

Off

Wi-Fi network

SSID:

Password:

Back Cancel

3 Set the Wi-Fi setting on the smart device to On.

•Check the user’s manual provided with your smart device for further details.

•After the network name (SSID) that can be used for the smart device is displayed, select the SSID displayed on the camera.

•When the message for entering a password (A95) is displayed, enter the password that is displayed on the camera.

•When the camera is successfully connected to a Wi-Fi network, the shooting screen is displayed with the Wi-Fi icon (A8).

4 Start the dedicated software installed on the smart device.

•The screen for selecting “Take photos” or “View photos” is displayed.

•When the message “Cannot connect to camera.” is displayed, retry the Wi-Fi network setting.

94