Nikon S9500, S9400 Error Messages

Error Messages

The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.

Display		Cause/Solution	A
O	Clock not set.		E68
(flashes)	Set date and time.
Battery exhausted.	Battery exhausted.		12, 14
	Charge or replace the battery.
	Battery temperature is high.
Battery temperature	Turn off camera, and allow battery to cool down before
	resuming use. 5 seconds after this message appears, the
is elevated. The	monitor is turned off, and the power-on lamp starts flashing		19
camera will turn off.	quickly. After the lamps flash for 3 minutes, the camera turns off
	automatically, but you can also press the power switch to turn it
	off manually.
The camera will turn	Inside of the camera has become hot. The camera turns off
	automatically.
off to prevent			–
	Leave the camera off until the inside of the camera has cooled
overheating.
	and then turn it on again.
Q	Camera cannot focus.
	•	Refocus.	26
(flashes red)
	•	Use focus lock.	68
Please wait for the	Camera cannot perform other operations until recording is
	complete.
camera to finish			–
	Wait until message clears from display automatically when
recording.
	recording is complete.
Memory card is write	Write-protect switch of the memory card is in “lock” position.		–
protected.	Slide the write-protect switch to “write” position.
	Write-protect switch of Eye-Fi card is in “lock” position.		–	Reference
	Slide the write-protect switch to “write” position.
Not available if Eye-Fi
	Error accessing Eye-Fi card.
card is locked.
	• Check that the terminal is clean.		16
This card cannot be				Section
	Error accessing memory card.		16
	• Confirm that memory card is correctly inserted.
used.	• Use an approved card.		17
This card cannot be	• Check that the terminal is clean.		16
read.	• Confirm that memory card is correctly inserted.		16

E91