The Shooting Menu (A(Auto) Mode)

Option

Description

 

 

Each time the shutter-release button is pressed all the way, the camera shoots

16 pictures at a rate of about 30 frames per

WMulti-shot 16 second and arranges them in a single picture.

The image mode is fixed at L(2560 × 1920 pixels).

The digital zoom is not available.

The icon for the current setting other than Single is displayed on the monitor (A8).

BNotes on Continuous Shooting

Focus, exposure and white balance are fixed at the values determined with the first shot in each series.

The frame rate may become slower depending on the image quality, image size, memory card type or shooting conditions.

The frame rate may become slower when ISO sensitivity (E37) in the shooting menu is set to 1600 or 3200.

Some features cannot be used in combination with other menu settings. See “Features Not Available in Combination“ (A64) for more information.

BNotes on Continuous H

It may take some time to save the images after shooting. The amount of time it takes to finish saving the captured images depends on the number of images, the write speed of the memory card, etc.

When ISO sensitivity increases, noise may appear in captured images.

Banding or variance in brightness or hue may occur in images that were captured under lighting that flashes quickly at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.

BNote on BSS

BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject moves or the composition changes.

BNote on Multi-shot 16

Banding or variance in brightness or hue may occur in images that were captured under lighting that flashes quickly at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.

CUsing Continuous shooting mode in combination with the self-timer

If you use Continuous shooting mode in combination with the self-timer (A53) with an n2s (2 seconds) setting, pictures can be shot continuously by reducing camera shake.

To use the self-timer (A53) when Continuous H, Continuous L or BSS is selected for the Continuous setting, keep pressing the shutter-release button all the way. When you release the shutter-release button, Single is automatically selected and the camera captures only one picture at a time.

Section Reference

E35