The Setup Menu

Setting the Travel Destination Time Zone

1 Use the multi selector to choose Time zone, and press the kbutton.

• The Time zone screen is displayed.

2 Choose xTravel destination and press the kbutton.

• The date and time displayed on the monitor change according to the region currently selected.

3 Press K.

• The time zone selection screen is displayed.

4 Press Jor Kto choose the travel destination (time zone).

•The time difference between home and the travel destination is displayed.

•In regions where daylight saving time applies, press H

to enable the daylight saving time function. When this function is set to on, the Wicon will be displayed at the top of the monitor and the camera clock advances

one hour. To disable the daylight saving time function, press I.

•If the time difference cannot be selected, set the correct time using Date and time.

•Press the kbutton to register the travel destination time zone.

•While the travel destination time zone is selected, the Zicon is displayed on the monitor when the camera is in shooting mode.

CwHome Time Zone

Time difference

Section Reference

•To switch to the home time zone, choose wHome time zone in step 2 and press the kbutton.

•To change the home time zone, choose wHome time zone in step 2 and perform the same procedure as for xTravel destination to set the home time zone.

E69