The Setup Menu

Charge by Computer

Press the dbutton Mzmenu icon (A6) MCharge by computer

Select whether or not the battery inserted into the camera is charged when the camera is connected to a computer via the USB cable (A77).

Option

Description

 

 

When the camera is connected to a computer that is running, Auto (default setting) the battery inserted into the camera is automatically charged

Off

using power supplied by the computer.

The battery inserted into the camera is not charged when the camera is connected to a computer.

Section Reference

BNotes on Connecting the Camera to a Printer

The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard.

When Auto is selected for Charge by computer, it may be impossible to print images with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed on the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer.

BNotes on Charging with Connection to a Computer

The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera’s display language and date and time have been set (A20). If the camera’s clock battery (A21) has been exhausted, the date and time must be reset before the battery can be charged or images can be transferred with connection to a computer. In this case, use the Charging AC Adapter EH-70P (A14) to charge the battery and then set the camera’s date and time.

If the camera is turned off, charging will also stop.

If the computer enters sleep mode while charging, charging will stop and the camera may be turned off.

When disconnecting the camera from the computer, turn the camera off and then disconnect the USB cable.

It may take longer to charge the battery with connection to a computer than with charging using the Charging AC Adapter EH-70P. Charging time increases when images are transferred while the battery is charging.

When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application.

The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging.

Depending upon computer specifications, settings, and power supply and allocation, it may be impossible to charge the battery using a computer connection while it is inserted into the camera.

E80