Preparation 2 Charge the Battery

1 Prepare the included Charging AC Adapter EH-70P.

Playback and Shooting of Basics The

If a plug adapter* is included with your camera, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

* The shape of the plug adapter varies according to the country or region in which the camera was purchased. The Charging AC Adapter comes with the plug adapter attached in Argentina and Korea.

2 Make sure the battery is inserted in the camera, and then connect the camera to the Charging AC Adapter in order of 1to 3.

•Keep the camera turned off.

•When connecting the cable, be sure that the plug is properly oriented. Do not use force when connecting the cable to the camera. When disconnecting the cable, do not pull the plug at an angle.

Charge lamp

Electrical outlet

USB Cable UC-E6 (included)

•When charging starts, the charge lamp flashes slowly in green.

•About 3 hours and 50 minutes is required to charge a fully exhausted battery.

•When the battery has been completely charged, the charge lamp turns off.

•See “Understanding the Charge Lamp” (A15) for more information.

3 Disconnect the Charging AC Adapter from the electrical outlet and then disconnect the USB cable.

14