Nikon S9500, S9400 Eye-FiUpload, BNotes on Eye-FiCards, CEye-FiCommunication Indicator

The Setup Menu

Eye-Fi Upload

Press the dbutton Mzmenu icon (A6) MEye-Fi upload

	Option	Description
b	Enable	Upload images created by the camera to a preselected
	(default setting)	destination when an Eye-Fi card is in the camera.
c	Disable	Images will not be uploaded.

BNotes on Eye-Fi Cards

•Note that images may not be uploaded if signal strength is insufficient even if Enable is selected.

•Remove the Eye-Fi card from the camera in a place where the use of radio waves is prohibited. Signals may be transmitted even if Disable is selected.

•Refer to the instruction manual of your Eye-Fi card for more information. In the event of malfunction, contact the card manufacturer.

•The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.

•The camera is not compatible with the endless memory function. When it is set on a computer, disable the function. If the endless memory function is enabled, the number of pictures taken may not be displayed correctly.

•Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless devices.

•Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.

CEye-Fi Communication Indicator

The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A8).

•w: Eye-Fi upload is set to Disable.

•x(lights): Eye-Fi upload enabled; waiting to begin upload.

•x(flashes): Eye-Fi upload enabled; uploading data.

•z: An error occurred. The camera cannot control the Eye-Fi card.

Section Reference

E85