Nilfisk-Advance America IVT 1000 CR H, IVT-1000CR Machine data, Safety, Grounding instructions

Use only as described in this manual. Use only Manufactureʼs recommended accessories and spare parts.

Do not use with damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

Regularly examine the supply cord for damage, such as cracking or ageing. If damage is found, replace the cord before further use. Only replace the supply cord with the type specified under “rec. spares” in the instruction manual.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

Under no circumstances should the machine be used for picking up hot material. In particular the machine must not be used for cleaning open and closed fireplaces, ovens or similar that contain warm or gloving ashes.

Do not use without dust bag and/or filters in place. Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

The machine must not be used for picking up combustible or explosive materials, nor should it be used in an explosive atmosphere.

2.3 Grounding instructions

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The plug must be inserted into an appropriate socket that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – improper connection of the equipment grounding conductor can result in a risk of electrical shock.

Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug supplied with the appliance – if it will not fit the socket, have a proper one installed by a qualified electrician.

Attention!!

Under no circumstances must the user tamper with the equipment.

All attempts by the user or by unauthorised personnel to dismantle, modify or, more generally, tamper with any part of the vacuum shall void the guarantee.

Contact your nearest

After-Sales Service Centre in the event of faults.

3 - Machine data

3.1 Identification data.

Always state all the identification data on the machine when ever you contact Nilfisk-Advance after sales service.

Exact identification of the machine model and serial

number will help prevent incorrect information from being given.

The identification plate with the machine data is shown in fig. 1

A Type

B Electrical Power

C Serial number - yywwXXXX (yy=year ww = week XXXX = number D Operating Frequency

E Dust class Category

F Ref. number

G Voltage

H Max. Current

3.2 - Main parts (fig. 2 / 3 / 4)

The following list of main parts will help users to understand

the terms used in this manual. Fig 2 standard machine

1.Motor head incl. handle

2.On / Off button

3.Exhaust filter cover

4.ULPA U 15 exhaust filter

5.Top container

6.Main filter “M” class Goretex® PTFE filter

7.Dust container

8.Stainless steel clamps

9.Trolley

Fig. 3 “H” class machine

1. Motor head incl. handle

2. On / Off button

3. Exhaust filter cover

4. ULPA U 15 exhaust filter

5. Top container

6. Vacuum Gauge / Manometer

8. “H” class HEPA H 13 filter

9. Dust container

10. Blind cover for inlet

11. Stainless steel clamps

12. Stainless steel clamps

Fig. 4 “Safe Pack” machine

1. Motor head incl. handle

2. On / Off button

3. Exhaust filter cover

4. ULPA U 15 exhaust filter

5. Top container

7. “Safe pack” unit

8. HEPA H 13 filter fixed inside safe pack unit 9. Stainless steel clamps

10. Trolley

4 - Safety

Attention!!

Check that all clamps are correctly positioned and working correctly before starting and using the machine.

Never tamper with the safety devices.

Always check that the protection and safety devices are mounted and working at the beginning of each work shift or before using the machine. If this is not the case, switch off the vacuum and report fault.

35