USER MANUAL

ENGLISH

7.After the ignition, let the engine run for a few seconds, then release the choke lever (74).

8.Let the engine warm up for a few minutes.

9.Disengage the parking brake by pressing the pedal (82) and by disengaging the lever (75).

10.Drive the machine to the working area, by keeping the hands on the steering wheel (72) and pressing the pedal (76) on the front side to move forward and on the rear side to move backward.

The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal.

11.Lower the main broom with the lever (80), then turn on the vacuum system by pressing the lower part of the switch (66).

12.Lower the right side broom with the lever (77).

13.If equipped, lower the left side broom with the lever (78).

NOTE

The brooms (10, 11, 12) can be lowered and lifted even when the machine is moving.

The brooms do not turn when they are lifted.

14. Start sweeping by turning the steering wheel (72) and moving the machine forward by pressing the pedal (76).

Stopping the machine

15.To stop the machine, release the pedal (76).

To stop the machine quickly, also press the service brake pedal (82).

In case of emergency, press the emergency push-button (71) to immediately stop the machine. To deactivate the emergency push-button (71), turn it in the direction shown by the arrow.

16.Lift the main and side brooms with the levers (80), (77), (78).

17.Turn off the vacuum system with the switch (66).

18.Turn off the machine by turning the ignition key (69) to “0”, then remove it.

19.Engage the parking brake by pressing the pedal (82), then engage the brake lock control lever (75).

MACHINE OPERATION

1.Avoid stopping for a long time with the machine in the same position and the brooms turning: this could create unwanted marks on the floor.

2.To collect light and bulky waste materials, lift the front skirt (18) by pressing the pedal (81); take into consideration that the machine vacuum capability is reduced when the front skirt is lifted.

WARNING!

When operating on wet floors, it is essential to turn off the vacuum system by pressing the switch (66) to prevent the dust filter from being damaged.

3.For machine proper operation, the dust filter must be as clean as possible. To clean the dust filter while sweeping, turn on the filter shaker for a short interval by pressing the upper part of the switch (66), then turn on the vacuum system by pressing the lower part of the switch (66).

While working, repeat the procedure every 10 minutes on average (depending on the dustiness of the area to be cleaned).

NOTE

This procedure can also be performed when the machine is moving.

CAUTION!

When the dust filter is clogged and/or the hopper is full, the machine cannot collect dust and debris anymore.

4.The hopper (4) should be dumped after each working period and whenever it is full (see the procedure in the next paragraph).

CAUTION!

The engine is equipped with a warning system to prevent damages to the engine itself in case the oil quantity in the carter is insufficient. Before the oil level goes below the safety limit, the warning system automatically stops the engine.

1463514000(1)2008-05 A

FLOORTEC R 680 P

15

Page 81
Image 81
Nilfisk-ALTO R 680 P manuel dutilisation Machine Operation, Stopping the machine

R 680 P specifications

The Nilfisk-ALTO R 680 P is a robust and versatile professional vacuum cleaner designed for a range of heavy-duty cleaning tasks. This model stands out for its powerful suction capabilities and user-friendly features, making it a popular choice among cleaning professionals and industries that require high-efficiency vacuuming solutions.

One of the key features of the R 680 P is its strong motor, which provides optimal performance in both wet and dry conditions. The vacuum is equipped with a high-efficiency turbine that ensures consistent suction power, allowing it to tackle even the most challenging debris, including liquids, dust, and larger particles. This versatility makes it suitable for use in diverse environments such as construction sites, workshops, and manufacturing facilities.

In terms of design, the R 680 P boasts a robust exterior that can withstand the rigors of industrial cleaning. It features a large capacity waste container, reducing the frequency of emptying and increasing productivity. The ergonomic handle and lightweight construction enhance maneuverability, making it easy to transport across various job sites.

The vacuum cleaner is also equipped with an advanced filtration system that captures fine dust particles and allergens. This is particularly important in maintaining air quality in enclosed spaces. The HEPA filters can be replaced easily, ensuring that the machine operates efficiently over time. Additionally, the vacuum has a practical filter cleaning system that helps maintain suction performance, making it ideal for continuous use.

Another outstanding characteristic of the R 680 P is its noise reduction technology. This feature allows for quieter operation without compromising on suction power, which is essential for environments where noise levels must be kept to a minimum.

The Nilfisk-ALTO R 680 P also includes various attachments and accessories that enhance its functionality. From specialized nozzles for crevices to larger brushes for wide surfaces, it can be customized for specific tasks. The versatility offered by these accessories makes this vacuum an indispensable tool for any professional cleaning team.

In summary, the Nilfisk-ALTO R 680 P is a powerful and efficient vacuum cleaner that combines strong suction capabilities with advanced filtration and user-friendly design. Its durability, versatility, and range of features make it an essential choice for professionals seeking a reliable cleaning solution in demanding environments. Whether dealing with wet or dry messes, the R 680 P is designed to tackle tough cleaning challenges effectively.