USER MANUAL

ENGLISH

CLOSED POCKET FILTER CLEANING AND INTEGRITY CHECK

NOTE

The polyester closed pocket filters are normally kept clean by using the filter shaker supplied with the machine.

If necessary, they can be cleaned externally according to the following procedure.

When the filtering surfaces are worn, the filter must be replaced.

1.Drive the machine on a level floor and engage the parking brake with the pedal (82) and the lever (75).

2.Turn the ignition key (69) to “0”.

3.Open the hood (23) and fasten it with the support rod (55).

4.Disconnect the vacuum system motor connector (26).

5.Release the fasteners (A, Fig. 12) and remove the vacuum system cover (B).

6.Unscrew the knobs (A, Fig. 16) and remove the brackets

(B).

7.Disconnect the filter shaker connector (B, Fig. 17) and remove the dust filter (A).

8.In an outdoor area, and with the operator wearing suitable equipment (gloves, mask, glasses), remove the polyester filtering surface, according to the following procedure.

9.Remove the filter shaker motor (A, Fig. 18) by unscrewing the two mounting screws.

10.Open the filter shaker motor support unit (B, Fig. 18) completely, and release the filtering pocket tension rods

(C).

11.Remove all the filtering pocket tension rods (D, Fig. 18).

12.Open the upper retaining cord (E, Fig. 18) of the closed pocket filter to remove it from the upper frame (F).

13.Remove the inner pocket separator (G, Fig. 18).

14.Clean the polyester fibber surface (H, Fig. 18) from the dirty side (by using an external vacuum cleaner), spreading it out completely or cleaning pocket by pocket. At the same time, clean both surfaces of the pocket separator (G, Fig. 18), thus removing anything deposited on them. Check the filtering surface for tears and replace it if necessary. It is also possible to use compressed air (maximum 6 Bar), blowing the air from the clean side towards the dirty side.

WARNING!

Do not wash the filter with water. The polyester fibber can shrink and become unusable.

15.If necessary, clean the filter compartment rubber gasket (C, Fig. 17) along its perimeter and check it for integrity. If necessary, replace it.

16.Assemble the components in the reverse order of disassembly.

Figure 16

Figure 17

F D C

B

A

Figure 18

P100229

P100230

E

G

H

P100231

1463514000(1)2008-05 A

FLOORTEC R 680 P

25

Page 90 Page 92
Page 91
Image 91
Nilfisk-ALTO R 680 P manuel dutilisation Closed Pocket Filter Cleaning and Integrity Check
Page 90 Page 92

R 680 P specifications

The Nilfisk-ALTO R 680 P is a robust and versatile professional vacuum cleaner designed for a range of heavy-duty cleaning tasks. This model stands out for its powerful suction capabilities and user-friendly features, making it a popular choice among cleaning professionals and industries that require high-efficiency vacuuming solutions.

One of the key features of the R 680 P is its strong motor, which provides optimal performance in both wet and dry conditions. The vacuum is equipped with a high-efficiency turbine that ensures consistent suction power, allowing it to tackle even the most challenging debris, including liquids, dust, and larger particles. This versatility makes it suitable for use in diverse environments such as construction sites, workshops, and manufacturing facilities.

In terms of design, the R 680 P boasts a robust exterior that can withstand the rigors of industrial cleaning. It features a large capacity waste container, reducing the frequency of emptying and increasing productivity. The ergonomic handle and lightweight construction enhance maneuverability, making it easy to transport across various job sites.

The vacuum cleaner is also equipped with an advanced filtration system that captures fine dust particles and allergens. This is particularly important in maintaining air quality in enclosed spaces. The HEPA filters can be replaced easily, ensuring that the machine operates efficiently over time. Additionally, the vacuum has a practical filter cleaning system that helps maintain suction performance, making it ideal for continuous use.

Another outstanding characteristic of the R 680 P is its noise reduction technology. This feature allows for quieter operation without compromising on suction power, which is essential for environments where noise levels must be kept to a minimum.

The Nilfisk-ALTO R 680 P also includes various attachments and accessories that enhance its functionality. From specialized nozzles for crevices to larger brushes for wide surfaces, it can be customized for specific tasks. The versatility offered by these accessories makes this vacuum an indispensable tool for any professional cleaning team.

In summary, the Nilfisk-ALTO R 680 P is a powerful and efficient vacuum cleaner that combines strong suction capabilities with advanced filtration and user-friendly design. Its durability, versatility, and range of features make it an essential choice for professionals seeking a reliable cleaning solution in demanding environments. Whether dealing with wet or dry messes, the R 680 P is designed to tackle tough cleaning challenges effectively.
Top Page Image Contents