USER MANUAL
ENGLISH
HOPPER HYDRAULIC LIFTING SYSTEM OIL LEVEL CHECK
WARNING!
This procedure must be performed with the hopper (4) fully retracted (as shown in the figure).
1.Engage the parking brake with the pedal (82) and the lever (75).
2.Turn the ignition key (69) to “0”.
3.Open the hood (23) and fasten it with the support rod (55).
4.Check that the oil level in the tank (41) is between the minimum (MIN) and maximum (MAX) marks shown in Fig. 25.
5.If necessary, add oil through the plug (A, Fig. 25), using the oil specified in Technical Data paragraph.
6.Remove the support rod (55) and close the hood (23).
DRIVE SYSTEM OIL LEVEL CHECK
1.Engage the parking brake with the pedal (82) and the lever (75).
2.Turn the ignition key (69) to “0”.
3.Open the hood (23) and fasten it with the support rod (55).
4.Check that the oil level in the tank (28) is between the minimum (MIN) and maximum (MAX) marks shown in Fig. 26.
5.If necessary, add engine oil SAE 10 W 40 through the plug (A, Fig. 26).
6.Remove the support rod (55) and close the hood (23).
P100238
Figure 25
A
MAX
MIN
P100239
Figure 26
FLOORTEC R 680 P |
27