Nilfisk-ALTO R 680 P Spark Screen Cleaning, Spark Plug Cleaning/Replacement, Assembly, A E C D B

Models: R 680 P

1 132
Download 132 pages 31.9 Kb
Page 96
Image 96
SPARK SCREEN CLEANING

ENGLISH

USER MANUAL

 

 

 

 

SPARK SCREEN CLEANING

1.Drive the machine on a level floor.

2.Engage the parking brake with the pedal (82) and the lever (75).

3.Turn the ignition key (69) to “0”.

4.Remove the screws (48), then disengage the fasteners (49) to remove the left side bulkhead (47).

5.Remove the mounting screws, then remove the engine exhaust end pipe (53).

6.Clean the spark screen as shown in the Petrol Engine Manual.

7.Perform steps 4 and 5 in the reverse order.

SPARK PLUG CLEANING/REPLACEMENT

1.Drive the machine on a level floor.

2.Engage the parking brake with the pedal (82) and the lever (75).

3.Turn the ignition key (69) to “0”.

4.Open the hood (23) and fasten it with the support rod (55).

5.Remove the screws (45), then disengage the fasteners (46) to remove the engine guard (44).

6.Clean/replace the spark plug (51), as shown in the Petrol Engine Manual.

7.Perform steps 4 and 5 in the reverse order.

FUSE CHECK/REPLACEMENT/RESET

1.Drive the machine on a level floor and engage the parking brake with the pedal (82) and the lever (75).

2.Turn the ignition key (69) to “0”.

3.Open the hood (23) and fasten it with the support rod (55).

Lamellar fuse check/replacement

4.Remove the cover (A, Fig. 29) and mark the positions of the fuses shown on the adhesive.

5.Check/replace the relevant fuse among the following (B):

F1 fuse (30 A): Key circuit

F2 fuse (30 A): Filter shaker

F3 fuse (30 A): Vacuum system

F4 fuse (30 A): Hydraulic pump

F5 fuse (10 A): Flashing light (optional)

F6 fuse (10 A): Working light (optional)

F7 fuse (10 A): Hopper actuator

F8 fuse (30 A): Spare fuse

Charging system fuse check/replacement

6.Check/replace the FD (70 A) charging system fuse (50).

Circuit breaker check

7.Check for deactivation of one of the following fuses, then reset it after the relevant motor has cooled down:

FA fuse (C, Fig. 29): Right side broom motor circuit breaker

FB fuse (D): Left side broom motor circuit breaker (optional)

FC fuse (E): Main broom motor circuit breaker

Assembly

8.Assemble the components in the reverse order of disassembly.

ASPARK PLUG CLEANING/REPLACEMENTFUSE CHECK/REPLACEMENT/RESETLamellar fuse check/replacementE C D

Charging system fuse check/replacementCircuit breaker checkAssemblyManual backgroundBManual backgroundManual backgroundManual backgroundManual background

P100249

Figure 29

30

FLOORTEC R 680 P

1463514000(1)2008-05 A

Page 96
Image 96
Nilfisk-ALTO R 680 P Spark Screen Cleaning, Spark Plug Cleaning/Replacement, Fuse Check/Replacement/Reset, Assembly